Gigabyte B650M D3HP DDR5 M-ATX AM5 Gaming Motherboard

• AMD Socket AM5, support for: AMD Ryzen™ 7000 / Ryzen™ 8000 / Ryzen™ 9000 Series Processors.
• (Go to GIGABYTE’s website for the latest CPU support list.)

• AMD B650

• Support for DDR5 8000(OC)/ 7800(OC)/ 7600(OC)/ 7200(OC)/ 7000(OC)/ 6800(OC)/ 6600(OC)/ 6400(OC)/ 6200(OC)/ 6000(OC)/ 5600(OC)/ 5200/ 4800 MT/s memory modules.
• 4 x DDR5 DIMM sockets supporting up to 256 GB (64 GB single DIMM capacity) of system memory.
• Dual channel memory architecture.
• Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules.
• Support for AMD EXtended Profiles for Overclocking (AMD EXPO™) and Extreme Memory Profile (XMP) memory modules.

• 2 x DisplayPorts, supporting a maximum resolution of 3840×2160@144 Hz (Support for DisplayPort 1.4 version).
• 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz (Support for HDMI 2.1 version and HDCP 2.3, native HDMI 2.1 TMDS compatible ports).

• Realtek® Audio CODEC
• High Definition Audio
• 2/4/5.1/7.1-channel

• Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)

• AMD Ryzen™ 7000 / 9000 Series Processors support PCIe 4.0 x16 mode.
• AMD Ryzen™ 8000 Series-Phoenix 1 Processors support PCIe 4.0 x8 mode.
• AMD Ryzen™ 8000 Series-Phoenix 2 Processors support PCIe 4.0 x4 mode.
• * The PCIEX16 slot can only support a graphics card or an NVMe SSD.

Chipset:

• 1 x PCI Express x1 slot, supporting PCIe 3.0 and running at x1.

• Ryzen™ 7000 / 9000 Series support PCIe 4.0 x4/x2 SSDs.
• Ryzen™ 8000 Series-Phoenix 1 / Phoenix 2 support PCIe 4.0 x4/x2 SSDs.

1 x M.2 connector (M2C_SB), integrated in the Chipset:

• Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSDs.

SATA & RAID:

• 4 x SATA 6Gb/s connectors.
• RAID 0, RAID 1, and RAID 10 support for both NVMe and SATA storage devices.

• 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 1 support.
• 1 x USB 3.2 Gen 1 port on the back panel.
• 1 x USB 2.0/1.1 port on the back panel.

Chipset:

• 2 x USB 3.2 Gen 1 ports on the back panel.
• 1 x USB Type-C® port with USB 3.2 Gen 1 support, available through the internal header.
• 2 x USB 3.2 Gen 1 ports available through the internal header.
• 5 x USB 2.0/1.1 ports (1 port on the back panel, 4 ports available through the internal headers).

• 1 x 24-pin ATX main power connector
• 1 x 8-pin ATX 12V power connector
• 1 x CPU fan header
• 2 x system fan headers
• 2 x addressable LED strip headers
• 1 x RGB LED strip header
• 2 x M.2 Socket 3 connectors
• 4 x SATA 6Gb/s connectors
• 1 x front panel header
• 1 x front panel audio header
• 1 x USB Type-C® header (USB 3.2 Gen 1 support)
• 1 x USB 3.2 Gen 1 header
• 2 x USB 2.0/1.1 headers
• 1 x Trusted Platform Module header (For GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0/GC-TPM2.0 SPI V2 module only)
• 1 x Q-Flash Plus button
• 1 x reset jumper
• 1 x Clear CMOS jumper

• 1 x PS/2 keyboard/mouse port
• 1 x USB Type-C® port, with USB 3.2 Gen 1 support
• 3 x USB 3.2 Gen 1 ports
• 2 x USB 2.0/1.1 ports
• 1 x HDMI port
• 2 x DisplayPorts
• 1 x RJ-45 port
• 3 x audio jacks

• Voltage detection
• Temperature detection
• Fan speed detection
• Fan fail warning
• Fan speed control (Supported depending on the fan installed)

• 1 x 256 Mbit flash
• Use of licensed AMI UEFI BIOS
• PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

• Support for GIGABYTE Control Center (GCC)
• Support for Q-Flash
• Support for Q-Flash Plus

• Micro ATX Form Factor; 24.4cm x 24.4cm